Voltage and current regulator API

Table of Contents

1. Introduction

Glossary

2. Consumer driver interface

Enabling and disabling

Configuration

Callbacks

3. Regulator driver interface

4. Machine interface

Supplies

Constraints

5. API reference

struct regulator_bulk_data — Data used for bulk regulator operations.

struct regulator_state — regulator state during low power system states

struct regulation_constraints — regulator operating constraints.

struct regulator_consumer_supply — supply -> device mapping

struct regulator_init_data — regulator platform initialisation data.

struct regulator_ops — regulator operations.

struct regulator_desc — Regulator descriptor

regulator_get — lookup and obtain a reference to a regulator.

regulator_get_exclusive — obtain exclusive access to a regulator.

regulator_put — "free" the regulator source

regulator_enable — enable regulator output

regulator_disable — disable regulator output

regulator_force_disable — force disable regulator output

regulator_is_enabled — is the regulator output enabled

regulator_count_voltages — count regulator_list_voltage selectors

regulator_list_voltage — enumerate supported voltages

regulator_set_voltage — set regulator output voltage

regulator_set_voltage_time — get raise/fall time

regulator_sync_voltage — re-apply last regulator output voltage

regulator_get_voltage — get regulator output voltage

regulator_set_current_limit — set regulator output current limit

regulator_get_current_limit — get regulator output current

regulator_set_mode — set regulator operating mode

regulator_get_mode — get regulator operating mode

regulator_set_optimum_mode — set regulator optimum operating mode

regulator_register_notifier — register regulator event notifier

regulator_unregister_notifier — unregister regulator event notifier

regulator_bulk_get — get multiple regulator consumers

regulator_bulk_enable — enable multiple regulator consumers

regulator_bulk_disable — disable multiple regulator consumers

regulator_bulk_free — free multiple regulator consumers

regulator_notifier_call_chain — call regulator event notifier

regulator_mode_to_status — convert a regulator mode into a status

regulator_register — register regulator

regulator_unregister — unregister regulator

regulator_suspend_prepare — prepare regulators for system wide suspend

regulator_suspend_finish — resume regulators from system wide suspend

regulator_has_full_constraints — the system has fully specified constraints

regulator_use_dummy_regulator — Provide a dummy regulator when none is found

rdev_get_drvdata — get rdev regulator driver data

regulator_get_drvdata — get regulator driver data

regulator_set_drvdata — set regulator driver data

rdev_get_id — get regulator ID